Apologies for any translation errors.
Manufacturer
The tiny house was built by Martin Fink. He is a carpenter and lived in tiny houses himself for decades.
Unfortunately, he closed his workshop at the end of 2023.
At this point, a heartfelt thank you for the great built and planning, the great foresight, and care!
Articles in this category
Posts from the other categories
Material testing
Due to the chemical sensitivities (MCS), I had to test all the materials used for tolerance before installation. You can find the results in this article.
Read MoreMaterial testing
Planning & Construction
This post describes the planning and construction of my MCS-tolerable tiny house on wheels. Grab a coffee or tea, reading may take a while :)
Read MorePlanning & Construction
Mold in tiny houses
Tiny houses often get moldy quickly. This is no coincidence, this article deals with the reasons and health consequences.
Read MoreMold in tiny houses
Ventilation
For a long-term mold-resistant tiny house, an appropriate ventilation concept is necessary. In this article, you will find information on what such a concept can look like and why window ventilation is usually not sufficient.
Read MoreVentilation
Mold in tiny houses
Tiny houses often get moldy quickly. This is no coincidence, this article deals with the reasons and health consequences.
Read MoreMold in tiny houses
Ventilation
For a long-term mold-resistant tiny house, an appropriate ventilation concept is necessary. In this article, you will find information on what such a concept can look like and why window ventilation is usually not sufficient.
Read MoreVentilation
Introduction to wall construction: planning and calculation
The wall structure must be suitable in terms of building physics! This applies in particular to statics and moisture and mould protection.
Read MoreIntroduction to wall construction: planning and calculation
Vapour barriers & retarders
If no air is to flow from the interior into the insulation level, there are generally three options:
Read MoreVapour barriers & retarders
Material testing
Due to the chemical sensitivities (MCS), I had to test all the materials used for tolerance before installation. You can find the results in this article.
Read MoreMaterial testing
Planning & Construction
This post describes the planning and construction of my MCS-tolerable tiny house on wheels. Grab a coffee or tea, reading may take a while :)
Read MorePlanning & Construction
Lessons learned: After 3 years
This post is about the experiences and mistakes made. The image shows the peeling varnish and deteriorating powder coating three years after construction.
Read MoreLessons learned: After 3 years
Ressources
Here you will find a small collection of interesting and helpful links:
Read MoreRessources
Manufacturer
Martin Fink: Unfortunately, he closed his workshop at the end of 2023.
Read MoreManufacturer
Contact
You can send me an e-mail to mail@hauspilz.de.
Read MoreContact
About
Hello!
I'm Lenny and I've been living in the Tinyhouse since 2020.
Read MoreAbout
Multiple chemical sensitivity
Symptoms & consequences
Read MoreMultiple chemical sensitivity